A soil wash plant separates excavation soil, dredging spoil and demolition waste into saleable aggregate, sand and a small sludge residue. It does this with water and mechanical action only — no chemicals in the aggregate stream — which is …
read more >>
Removing fine sand from aggregate is straightforward once the feed is wet enough. Dry screening almost never separates the 75–150 μm (0.075–0.15 mm) fraction — the grains are too small and too light. The three-step process that actually works is: …
read more >>
A sand producer in Algeria was mining natural river sand that looked clean in the stockpile but failed concrete-grade specs. Lab sieve analysis showed the feed was roughly 50% clay and silt by weight, with only half the material being …
read more >>
LZZG designed a complete aggregate washing and sand classification plant for Hungary customer. The 150 t/h production line washes quarry material and recovers saleable aggregate from overburden and waste excavation, producing graded coarse aggregate alongside separate coarse and fine sand …
read more >>
LZZG designed and supplied a natural river sand washing and classification plant for a sand producer in Punjab, Pakistan. The line washes Indus-basin river sand, removes surface silt and clay, dewaters the product and recycles process water through a thickener …
read more >>
A river sand operator working the Niger–Benue confluence near Lokoja, was pumping sand directly from the watercourse and selling it as-was. The raw sand carried high clay content, mixed pebbles and floating debris, which lowered its market value, at the …
read more >>
A quarry in northern Philippines needed to turn weathered mountain sand into concrete-grade aggregate. Local river sand is getting harder to permit, and the deposit they owned carried 15–18% silt plus a lot of loose rock. This case walks through …
read more >>
This Azerbaijan customer owns a large‑scale natural sand mine. The mine covers an area of around 15 hectares, with an average sand layer thickness of about 10 m and considerable mineral reserves. The customer intends to develop and operate the mine …
read more >>
A Poland customer intends to select a gear drive rotary drum scrubber for his sand and gravel plant. The feed material is clay-contaminated aggregate/gravel in the size range of 16–100 mm. Following extensive analysis and consultations, the expected specifications for …
read more >>
This client is a leading concrete producer in Almaty Kazakhstan market with over 15 years of industry experience. They are currently exploring potential suppliers for a new 150 t/h sand washing plant for their sand quarry operation. The Almaty customer is particularly …
read more >>
According to the on‑site conditions at the Vietnam customer’s concrete plant, we adopt a gravity flow/step-design layout and the finished product of the concrete sand washing plant is concrete sand sized at 5 mm. Concrete Sand Washing Plant Flow Concrete Sand Washing …
read more >>
Today our 70 t/h river sand washing plant for our Russian customer has been finished and ready for shipment. The river sand washing plant combines sand washing, size classification and purification, tailing treatment and zero‑discharge of wastewater. It fits the local river …
read more >>
Copyright © 2015 - 2026 Luoyang Longzhong Heavy Machinery Co., Ltd. Website Map | Privacy policy | Contact Us
Inquiry