What You Should Know About Running A Sand Washer

Site Installation Requirements

1. Power

The sand washer is a device that needs to be powered on, and the power of the sand washer is relatively large. When choosing a location, it is necessary to consider whether there is a stable power supply that is sufficient to support high power around and shorten the transmission line as much as possible. If possible, try to use the power grid.

2. Water source

The main job of the sand washing machine is to clean the stone, so it cannot do without water, so it has a great demand for water. When choosing the installation location, try to choose a place with sufficient water.

3. Smooth traffic

The main job of the sand washer is to clean the stone. The washed stone needs to be sold directly, so transportation around the sand washer is also very important. Choose a station connected to a public road. If you use water transportation, please choose an existing dock or a location suitable for the construction of the dock.

4. Geology

For safety reasons, the location where the sand washer is installed should have better engineering geological conditions as much as possible, avoid construction under faults, landslides, and flood levels, and avoid installation in silt, hummus, ancient wells, etc.

Operation Precautions

1. First, check the cleanliness of the drainage hole and the sewage outlet before the sand washer runs.

2. Check the tightness of screws and nuts, and secure all screws.

3. Lubricating oil must meet the standard.

4. Check whether the belt of the sand washer is in good condition. If the belt is damaged, please replace it. If there is oil on the belt, clean it with a rag.