Our Location  |  Contact Us 
LZZG LOGO
LZZG LOGO
Location: Home » NEWS » How to deal with fine sand recycling machine wear?

How to deal with fine sand recycling machine wear?

Posted: 2018-03-24

The wear of mechanical equipment in the process of use is unavoidable, especially in the use of fine sand recovery machine. Because of the particularity of its production work, the wear is very obvious. What is the wear of fine sand recycling machine?

Natural wear: It usually refers to the friction among parts of a machine during the normal use and operation of machinery. This part of wear is usually slow and does not cause damage in the short term.

Solution: in the use of the fine sand recovery machine, we should pay attention to the daily maintenance of the fine sand recycling machine, and regularly replenish the lubricating oil.

How to deal with fine sand recycling machine wear

Unnatural wear: This reasons are mainly the unreasonable machinery structure itself, the low quality of individual parts, nonstandard and incorrect installation of some parts, damage caused by the improper operation of the device, etc.

Solution: in the process of using the fine sand recovery machine, we should make good maintenance and replace the defective parts in a timely manner. Only we can better find the problems in the process of use and deal with them timely, so as to better ensure the high efficiency and normal safety operation of the fine sand recycling machine.

Send Message

Please write down your requirement and contact details in the following form. You can also send a message to us by this email export@lylzzg.com, we will reply to you within 24 hours.

Inquiry

Name:

E-Mail:

Phone:

Title:

Detailed Requirements:

If you have any question, please click here for live help. If you have any question, please click here for live help.