The Daily Operation Of Spiral Chute

The spiral chute is a commonly used industrial equipment, mainly used for transporting and conveying different types of materials. It has a flexible design, simple structure, and can meet the needs of a variety of working environments. The mastery of its operating procedures is of great significance to improving the efficiency of mineral processing and product quality.

Daily operation requirements of the spiral chute

1. Feed particle size

The ore particle size should be controlled within a certain range. Too large will hinder the flow of minerals and block the concentrate discharge pipe.

2. Control mining volume

When the concentrate contains more mud and is fine, the feed volume should be small; when the concentrate particle size is coarse and contains less mud, the feed volume should be large.

3. Control of washing water

Washing should be dispersed from the inner edge to avoid impacting the ore flow. A large amount of washing water will result in a high concentrate grade, but a low recovery rate; a small amount of washing water will help improve the recovery rate. The washing water should be gradually increased from top to bottom.

4. Adjustment of concentrate yield

The concentrate yield is adjusted by the movable scraper of the rotary cutter. When too much concentrate is cut, the concentrate grade will decrease.

5. Setting of the chute inclination

The setting of the chute inclination has a significant impact on the efficiency of the spiral chute. If the inclination is too large, the flow rate will increase, which may lead to incomplete particle sorting; if the inclination is too small, the flow rate will slow down, which may reduce the processing efficiency.

6. Selection of chute material

The selection of chute material is also an important factor. The wear resistance, corrosion resistance, friction coefficient, and other characteristics of the material directly affect the service life and separation effect of the equipment.

7. Optimized design and installation

The fluid mechanics characteristics need to be fully considered during the design to ensure the rationality of the chute structure. At the same time, the installation process must be strictly carried out in accordance with the design parameters to avoid installation errors affecting normal operation.

8. Regular maintenance and care

The spiral chute will inevitably wear and age during long-term operation. Therefore, regular maintenance and care are necessary measures to ensure the efficient operation of the equipment. Technological innovation and improvement: Continuous technological innovation and improvement are important ways to improve the efficiency of the spiral chute.

9. Evaluation and monitoring of the efficiency of the spiral chute

In order to objectively evaluate the efficiency of the spiral chute, a set of scientific quantitative evaluation standards needs to be established. During the operation of the spiral chute, the application of advanced monitoring systems to monitor key parameters in real time can effectively identify potential problems and improve the efficiency of the spiral chute by adjusting operating parameters.