Our Location  |  Contact Us 
LZZG LOGO
Location: Home » PRODUCTS » Crushing Equipment » PF Series Impact Crusher
pf series impact crusher

PF Series Impact Crusher

The impact crusher deals with all kinds of coarse, medium and fine materials with side length no more than 500mm and compressive strength no more than 350Mpa.

Application Scope: gravel yard, mining, coal mining, concrete mixing station, dry powder mortar, power plant desulfurization, quartz sand, etc

Process Material: pebble, granite, basalt, iron ore, limestone, quartzite, diabase, etc

  • Overview

    What Is a PF Impact Crusher

    The PF series impact crusher is a horizontal-shaft machine that breaks rock with high-speed impact rather than compression. Feed enters the chamber and meets a rotor fitted with blow bars turning at high speed. The bars strike the material and throw it against impact plates, and it rebounds for further blows until it is small enough to leave the chamber. Because the rock fractures along its natural lines, the product is largely cubical with little internal tension or cracking.

    The crusher accepts feed up to about 500 mm with a compressive strength up to 350 MPa and is used for secondary and tertiary crushing of soft and medium-hard material. It is common in railway, highway, energy, cement, chemical and construction applications, and it works well with limestone, granite and recycled concrete. Compared with compression crushers, it gives a high reduction ratio in a single stage and a strong shaping effect.

    pf series impact crusher manufacturer

    Main Parts and Wear Components

    The main assemblies are the rotor, the blow bars, the impact plates and their adjustment springs, the frame and the drive. The blow bars and impact liners carry the wear and are designed for quick replacement, and a keyless rotor connection simplifies fitting them. The gap between the rotor and the impact plates sets the discharge size, and adjusting it changes the grading without adding extra crushing stages.

  • Working principle

    Impact and Rebound

    The motor drives the rotor through belts, and the blow bars on the rotor strike the incoming material at high speed. The rock is thrown against the impact device above the rotor and shatters on contact. It then rebounds from the impact liner back into the path of the blow bars and is hit again, so the material passes through a series of impacts rather than a single compression.

    Repeated Crushing and Discharge

    Particles are reduced from large to small inside the impact chamber and remain in circulation until they reach the required size, at which point they discharge through the outlet. The impact plates are held against the load by springs or hydraulic devices, which also give way if uncrushable material enters. Adjusting the plate gap controls the product size and keeps the circuit simple, often removing the need for an additional stage.

  • Features & Benefits

    1. Cubical product. Impact fracture gives well-shaped aggregate with low flake content and good concrete properties.

    2. High reduction ratio. A single stage achieves reductions that compression machines need more passes to reach.

    3. Simple structure. The keyless rotor connection and compact frame make the machine straightforward to operate.

    4. Adjustable grading. The impact-plate gap changes the discharge size and simplifies the crushing circuit.

    5. Wear-resistant parts. High-chromium blow bars and dedicated impact liners stand up to repeated impact.

    6. Easy maintenance. Wear parts are replaced quickly, and the machine gives reliable performance with routine servicing.

  • Specifications

    Model  Rotor spec (mm) Feed opening (mm) Max feed size(mm) Capacity (mm) Power(kw) Weight(t) Overalldimension(mm)
    PF-0807 Φ850×700 400×730 300 15-30 30-45 8.1 2210×1490×2670
    PF-1007 Φ1000×700 400×730 300 30-50 37-55 9.5 2400×1558×2660
    PF-1010 Φ1000×1050 400×1080 350 50-80 55-75 14 2400×2250×2620
    PF-1210 Φ1250×1050 400×1080 350 70-120 110-132 17 2690×2338×2890
    PF-1214 Φ1250×1400 400×1430 350 130-180 132-160 22 2690×2688×2890
    PF-1310 Φ1300×1050 400×1170 400 80-140 110-160 19.2 2780×2478×2855
    PF-1315 Φ1320×1500 400×1520 500 160-250 180-260 26 3096×3273×2667
  • Inquiry

    Please write down your requirement and contact details in the following form. You can also send a message to us by this email export@lylzzg.com, we will reply to you within 24 hours.

    Inquiry

    Name:

    E-Mail:

    Phone:

    Title:

    Detailed Requirements:

If you have any question, please click here for live help. If you have any question, please click here for live help.
WhatsApp