Overview
What is an HP Hydraulic Cone Crusher
The HP series hydraulic cone crusher is a multi-cylinder compression crusher used for secondary and tertiary reduction of hard and abrasive rock. Like other cone crushers it gyrates a mantle inside a fixed concave, but the key functions, setting adjustment, overload protection and cavity clearing, are handled by hydraulic cylinders rather than springs. This gives precise control of the discharge setting and fast, automatic response to tramp iron.
The chamber is designed for lamination crushing, where particles break against each other under pressure, which raises the share of cubical product and improves capacity. The HP cone is widely used in mining, cement and the sand and aggregates industry for ore, metallic rock, bauxite, quartz, basalt and limestone, and it is chosen where high throughput and a consistent, well-shaped product are needed.

Main Parts and The Hydraulic System
The machine is fitted with insurance, locking and lifting cylinders working together. The insurance cylinders protect against uncrushable material, the locking cylinders hold the adjustment ring in place, and the lifting cylinders raise the top for servicing or clear a jam without dismantling the machine. The concave and mantle are made of high-manganese steel, and a labyrinth seal together with dedicated oil lubrication prevents the oil-water mixing that shortens bearing life.
-
Working principle
Gyrating and Lamination Crushing
The motor turns the transmission shaft and bevel gears, which drive the eccentric sleeve. The conical shaft then gyrates around a fixed point, so the crushing wall alternately approaches and leaves the mortar wall fixed on the adjusting sleeve. Ore caught in the chamber is repeatedly impacted, squeezed and bent, with much of the reduction taking place through particle-on-particle pressure in the material bed.
Hydraulic Adjustment and Tramp Release
The discharge setting is changed hydraulically, which is quick and repeatable, and the speed and chamber profile can be matched to raise the crushing ratio and the cubical content. When iron enters the chamber or the machine stops under load, the hydraulic system lifts the top automatically and discharges the material, removing the manual clearing that spring cones require. Once the tramp material has passed, the crusher returns to its set position.
-
Features & Benefits
1. Precise hydraulic adjustment. The outlet setting is changed reliably and held firmly by the locking cylinders.
2. Automatic tramp protection. Insurance cylinders and automatic roof lifting protect the frame and clear jams without manual work.
3. More cubical product. A lamination chamber and matched rotor speed improve shape and reduce flaky material.
4. Long wear life. High-manganese liners and the protective material bed lower wear on hard and abrasive feed.
5. Clean lubrication. Hydraulic adjustment, oil lubrication and a labyrinth seal prevent oil-water contamination.
6. Easy maintenance. Hydraulic opening gives access to the chamber and wear parts without a crane or long shutdown.
-
Specifications
Model Cavity (coarse/fine) Min discharge setting(mm) Feed opening(mm) Capacity(t/h) Power(kw) Weight(t) Movable cone diameter(mm) HP-160 C 13 150 120-240 160 13 950 F 6 76 55-180 HP-220 C 13 225 150-430 220 18 1160 F 6 86 90-260 HP-315 C 13 290 190-610 315 26 1400 F 6 100 108-320 HP-400 C 13 320 230-700 400 33 1500 F 6 110 145-430 -
Inquiry
Please write down your requirement and contact details in the following form. You can also send a message to us by this email export@lylzzg.com, we will reply to you within 24 hours.











Inquiry