Overview
What Is A CS Spring Cone Crusher
The CS series spring cone crusher is a compression-type secondary and tertiary crusher that breaks hard and abrasive rock inside a gyrating cone. A moving cone, or mantle, sweeps inside a fixed outer cone, the concave. As the gap narrows the rock is compressed and crushed, and as it opens the material drops further down the chamber until it passes the discharge setting. A ring of heavy coil springs around the frame holds the top in place and gives way when uncrushable material enters.
Because it relies on lamination rather than high-speed impact, the spring cone crusher wears slowly on hard rock and delivers steady, high throughput. It is widely used in mining, aggregates, metallurgy and construction for secondary and fine crushing after a jaw crusher, and it works well with granite, basalt, iron ore, quartzite and other hard materials.

Main Parts and The Spring System
The main components are the frame, the fixed and moving cone assemblies, the spring mechanism, the bowl and adjustment ring, the eccentric sleeve and the transmission, together with lubrication and electrical systems. The springs are the defining feature: when tramp material reaches the chamber they compress and let the gap widen so the object passes, then return the frame to its set position. A hydraulic cavity-cleaning system helps clear a serious jam, and the grease seal keeps dust out of the lubrication circuit.
-
Working principle
How The Cone Gyrates
The motor drives the eccentric sleeve through V-belts, a pulley and a pair of bevel gears. The moving cone shaft is seated in the eccentric sleeve, so as the sleeve turns the mantle gyrates without spinning on its own axis. The crushing wall moves close to the mortar wall and then away from it, and the rock in the annular chamber is repeatedly squeezed, impacted and bent between the two surfaces.
Interparticle Crushing and Discharge
Much of the breakage happens between particles pressed against each other rather than only against the metal, which is known as interparticle or lamination crushing. This produces a more even product and protects the wear liners. After repeated passes the material reaches the required size and falls through the outlet. The closed side setting, the narrowest point of the cycle, sets the maximum product size and is changed through the adjustment ring and by selecting different chamber profiles.
-
Features & Benefits
1. Suits hard rock. Compression crushing and high-grade wear parts handle abrasive feed with long intervals between liner changes.
2. High, steady output. The gyrating motion and large chamber give continuous throughput at the secondary and fine stages.
3. Reliable overload protection. The spring ring lets tramp material pass without damaging the frame or shaft.
4. Good sealing. A grease seal and labyrinth arrangement keep dust and water out of the lubrication system for stable running.
5. Adjustable product size. Coarse, medium and fine chambers and the adjustment ring cover a wide range of discharge settings.
-
Specifications
Model Movable Cone Diameter mm (inch) Chamber Style Opening Side Closed Side Discharging Opening (mm) REV (r/min) Power (kw) Capacity (t/h) Machine Size (mm) Max.Feeding (mm) CSB75 900 (3′) medium 83 102 9-22 580 75 45-91 2821×1880 ×2164 coarse 159 175 13-38 59-163 CSD75 914 (3′) fine 13 41 3-13 580 75 27-90 2821×1880 ×2410 medium 33 60 3-16 27-100 coarse 51 76 6-19 65-140 CSB160 1295(4 1/4′) fine 109 137 13-31 485 185 109-181 2800×2342 ×2668 medium 188 210 16-31 132-253 coarse 216 241 19-51 172-349 CSD160 1295(4 1/4′) fine 29 64 3-16 485 160 36-163 2800×2342 ×2668 medium 54 89 6-16 82-163 coarse 70 105 10-25 109-227 CSB240 1650(5 1/2′) fine 188 209 16-38 485 240 181-327 3911×2870 ×3771 medium 213 241 22-51 258-417 coarse 241 268 25-64 299-635 CSD240 1650(5 1/2′) fine 35 70 5-13 485 240 90-209 3917×2870 ×3771 medium 54 89 6-19 136-281 coarse 98 133 10-25 190-336 CSB400 2134(7′) fine 253 278 19-38 435 400 381-726 5200×4300 ×4700 medium 303 334 25-51 608-998 coarse 334 369 31-64 870-1400 CSD400 2134(7′) fine 51 105 5-16 435 400 190-408 5200×4300 ×4700 medium 95 133 10-19 354-508 coarse 127 178 13-25 454-599 -
Inquiry
Please write down your requirement and contact details in the following form. You can also send a message to us by this email export@lylzzg.com, we will reply to you within 24 hours.











Inquiry